DrillMore provide DTH drill bit designed according to your local rock condition, to ensure drilling safety and improve the drilling speed. Our DTH Bit Size from 3" To 40", Bit Shank DHD/COP/QL/ SD/MISSION/NUMA/CIR/BR etc.
CIR130-150 Middle-low Air Pressure DTH button bit, Shank Type: CIR150, 6 splines
CIR series drill bits
| specifications | Face Form | Bit Dia. | Spline | Button type | Gauge Buttons | Front buttons | Weight |
| CIR65 | Flat Face | 65 | 4 | Spherical | 4×Ø12 | 2×Ø12 | 1.5 |
| Flat Face | 68 | 4 | Spherical | 4×Ø12 | 2×Ø12 | 1.6 | |
| CIR70 | Flat Face | 76 | 4 | Spherical | 6×Ø12 | 4×Ø11 | 2. |
| Convex Face | 85 | 4 | Spherical | 6×Ø13 | 2×Ø12+2×Ø11 | 2.3 | |
| CIR90 | Convex Face | 90 | 6 | Spherical | 6×Ø14 | 2×Ø13+2×Ø12 | 3.75 |
| Concave Face | 110 | 6 | Ballistic | 6×Ø14 | 6×Ø13 | 4.8 | |
| CIR110 | Concave Face | 110 | 6 | Ballistic | 6×Ø14 | 6×Ø13 | 6.2 |
| Concave Face | 130 | 6 | Ballistic | 8×Ø14 | 4×Ø14+3×Ø13 | 8.05 | |
| Flat Face | 140 | 6 | Ballistic | 8×Ø14 | 8×Ø14 | 9. | |
| CIR150 | Convex Face | 155 | 6 | Ballistic | 9×Ø16 | 10×Ø14 | 16.7 |
| Convex Face | 165 | 6 | Ballistic | 9×Ø16 | 10×Ø14 | 17.55 | |
| Convex Face | 178 | 6 | Ballistic | 9×Ø16 | 6×Ø16+6×Ø14 | 18.85 | |
| CIR170 | Convex Face | 195 | 6 | Ballistic | 9×Ø16 | 6×Ø16+8×Ø14 | 24.2 |
| Convex Face | 203 | 6 | Ballistic | 9×Ø16 | 6×Ø16+10×Ø14 | 26.35 |
How to find a suitable DTH bit?
DrillMore DTH Drill Bit has a variety of carbide and face designsfor use in different ground conditions.
| ||||
| Spherical/round buttons are usually used as gauge buttons of DTH bits, suitable for very abrasive and very hard formations. | Parabolic buttons are usually used as gauge buttons and front buttons of DTH bits, suitable for medium abrasive and hard formations. | Ballistic buttons are usually used as front buttons of dth bits, suitable for medium abrasive and medium hard formations. They can also be used as gauge buttons if the rock is soft. | Sharp buttons are usually used as front buttons of DTH bits for soft formations, suitable for high rotation speed and low bit broken rate soft rock. | Flat buttons are usually used as protection buttons to reduce wear on rubbing surface of DTH bits. |
WiertłoWięcej narzędzi do skał
DrillMore poświęca się sukcesowi swoich klientów, dostarczając wiertła do każdego zastosowania. Oferujemy naszym klientom z branży wiertniczej wiele opcji. Jeśli nie znajdziesz bitu, którego szukasz, skontaktuj się z naszym zespołem sprzedaży pod adresem poniżej, aby znaleźć odpowiedni bit do swojego zastosowania.
Główne biuro:XINHUAXI ROAD 999, DYSTRYKT LUSONG, ZHUZHOU HUNAN CHINY
Telefon: +86 199 7332 5015
E-mail: [email protected]
Zadzwoń do nas teraz!
Jesteśmy tutaj aby pomóc.
Twój adres e-mail nie zostanie opublikowany. Pola wymagane są oznaczone *
